PurgEye 300 Nano
Argweld® PurgEye® 300 Nano Weld Purge Monitor® is a low cost, basic entry level version of the Argweld® PurgEye® 300 for indicating low oxygen levels in inert gas for weld purging down to 10 ppm, and theoretically can be used as a 0 PPM purge monitor.
PurgEye 300 Nano is a free flow monitor and does not feature a mechanical sampling pump. With no moving parts to fail, the purge meter has a very high reliability, low repair costs, and low re-calibration costs.
Purge Eye 300 nano is an oxygen meter that uses a unique new low cost longlife sensor which has very little maintenance requirement. The sensor is integrally mounted to eliminate electrical interference. It is far superior technology as compare to the monitors with wet cell technology that have to be constantly calibrated and have sensors replaced.
The Argweld PurgEye 300 Nano is a small, lightweight and inexpensive, titanium purge monitor. Use this low cost purge monitor when welding exotic alloys and materials such as titanium.
Do you need data logging capability or more welder controls? Use our
The PurgEye® 300 Nano is perfect for operation with manual welding, orbital welders, welding enclosures, pipe welding, chamber welding, duplex steel and titanium welding and ideal for welding stainless steel in ultra clean applications.
The PurgEye® 300 Nano has a warm up time of less than 60 seconds.
PurgEye® 300 Nano has secure ‘leak tight’ connectors for weld purge hoses. Also, the instrument can be used with optional accessory hand pump and gas sampling probe.
The PurgEye® 300 Nano has an operating voltage of AC 115/230 V single phase 50/60Hz. The unit uses an external 12 V Power Supply Unit with an input voltage range of AC 90 to 260 V (included).
The PurgEye® 300 Nano has a large alpha-numeric display.
Display readings can only be shown in ppm.
External 12 V Power Supply Unit (including multiple international mains adaptor connections)
Sample tube set (40 cm red tubing and 1 metre green tubing)
User instruction booklet
Storage and presentation case
Calibration Certificate for the purpose of Quality Control Procedures and Management Systems
Argweld® PurgEye® 300 Nano Weld Purge Monitor® Accuracy Range
|Measuring Range:||1,000 ppm down to 10 ppm|
|Accuracy:||±2.0% of scale reading|
|Size:||145 x 190 x 70 mm|
|Power Consumption:||18 W|
|Operating Voltage:||AC 115/230 V single phase 50/60 Hz|
View and download our range of Weld Purge Monitors
View and download our range of Weld Purge Equipment
Need more information, please refer the manufacturer Huntingdon Fusion by clicking here