Tri Tool Replacement Tool Bits

Justram supplies Tri Tool replacement tool bits for pipe and tube facing, beveling, severing and counterboring. Match the part number to the machine, holder, material and required preparation. Tool-bit resharpening is also available through our Aurora, Ontario facility, subject to inspection.

Select replacement bits for your Tri Tool machine

Start with the machine model and existing tool-bit part number, then confirm the holder, material and cut geometry. A bit identified for one operation or tool module should not be assumed interchangeable with another. The references below include standard, extended-range and application-specific tooling.

Jump to a machine reference

201BA · BOILERMASTER · 204B · 208B · 214B · 224B · 236B · 300 MicroFacer · 301 · 301QL · 301SP · 302 · 304 · 306 · 308 · 572AC · 576AC · 614RBL-660RBL · 601SBCM-603.5SBCM · 601SBM – 602.5SBM

Legacy tool-bit reference table

This table retains the listed machine and part references for identification. Confirm current replacements, coating, handedness and dimensional compatibility with Justram before ordering. A tool-bit range does not override the host machine’s mounting, wall-thickness or clearance limits. References described as full range apply to their specified setup.

Tri Tool MachineTool Bit
201BA37 ½ Degree Bevel Tool Bits – Carbon Steel
 99-4000 Facing, Full Range
 99-4032 Bevel, .125″ through .928″ ID
 99-4034 Bevel, .664″ through 1.470″ ID
 99-4132 Bevel, 1.06″ through 1.87″ ID
 37 ½ Degree Bevel Tool Bits – Stainless Steel
 99-4040 Facing, full range
 99-4036 Bevel, .125″ through .928″ ID
 99-4038 Bevel, .664″ through 1.470″ ID
 99-4133 Bevel, 1.06″ through 1.87″ ID
 30 Degree Bevel Tool Bits – Carbon Steel
 99-4000 Facing, full range
 99-9634 Bevel, .125″ through .928″ ID
 99-9636 Bevel, .664″ through 1.470″ ID
 99-0170 Extended Range Facing (use 99-9636 for bevel)
 30 Degree Bevel Tool Bits – Stainless Steel
 99-4040 Facing, full range
 99-4518 Bevel, .125″ through .928″ ID
 99-9637 Bevel, .664″ through 1.470″ ID
 99-1963 Extended Range Facing (use 99-9637 for bevel)
  
BOILERMASTER37 ½ Degree Bevel Tool Bits – Carbon Steel
 99-5243 Facing – Full Range
 BoilerMaster1 Bevel – Full Range
 30 Degree Bevel Tool Bits – Carbon Steel
 99-5243 Facing, full range
 99-5422 Bevel, 1.25” through 2.50” pipe
 99-6398 Bevel, 2.50” through 4.00” pipe
  
204B37 ½ Degree Bevel Tool Bits – Carbon Steel
 99-0257 Facing, 1” to 2.5” pipe
 99-3571 Facing, 3” thru 4” pipe
 DURABIT7 Bevel, .63” ID to 3.5” OD pipe
 99-3711 Bevel, 3” thru 4” pipe
 37 ½ Degree Bevel Tool Bits – Stainless Steel
 99-0789 Facing, 1” to 2.5” pipe
 99-0714 Facing, 3” thru 4” pipe
 99-3111 Bevel, . 63” to 3.5” OD
 99-3712 Bevel, 3” thru 4” pipe
 30 Degree Bevel Tool Bits – Carbon Steel
 99-0257 Facing, 1” to 2.5” pipe
 99-3571 Facing, 3” thru 4” pipe
 99-3127 Bevel, 1.25” to 2.50” pipe
 99-8286 Bevel, 3” thru 4” pipe
 30 Degree Bevel Tool Bits – Stainless Steel
 99-0789 Facing, 1” to 2.5” pipe
 99-0714 Facing, 3” thru 4” pipe
 99-5298 Bevel, 1.25” to 2.50” pipe
 99-3194 Bevel, 3” thru 4” pipe
 204B Flange Facing Tool Bits:
 99-2553 Inside Record Finish 1.5″ to 9″
 99-2554 Inside Smooth Finish 1.5″ to 9″
 99-2089 Inside Recessed 1.5” to 9”
 99-2555 Outside Record Finish 4.5” to 12″
 99-2556 Outside Smooth Finish 4.5″ to 12″
 99-2423 Outside Recessed 4.5” to 9”
  
208B37 ½ Degree Bevel Tool Bits – Carbon Steel
 DURABIT4 Facing, full range
 DURABIT5 Bevel, 7″ and smaller pipe
 DURABIT6 Bevel, 2” through 8″ pipe
 99-2907 Cbore 4:1 lead out, 2.1″ through 7.2″ ID
 99-2908 Cbore 4:1 lead out, 2.5″ through to 7.6″ ID
 99-2909 Cbore 4:1 lead out, 3.5″ through to 8.1″ ID
 37 ½ Degree Bevel Tool Bits – Stainless Steel
 DURABIT4 Facing, full range
 DURABIT5 Bevel, 7″ and smaller pipe
 DURABIT6 Bevel, 2” through 8″ pipe
 30 Degree Bevel Tool Bits – Carbon Steel
 DURABIT4 Facing, full range
 99-3663 Bevel Bit 30 Deg, CS (1.625” to 6.93” ID)
 30 Degree Bevel Tool Bits – Stainless Steel
 DURABIT4 Facing, full range
 99-3664 Bevel Bit 30 Deg SS (1.625” ID- 8.63” O.D.)
 208B ID Tracking Module Tool Bits
 99-4520 Facing
 99-0135 Bevel 37.5
 208B Flange Facing Tool Bits:
 99-2553 Inside Record Finish 1.5″ to 9″
 99-2554 Inside Smooth Finish 1.5″ to 9″
 99-2089 Inside Recessed 1.5” to 9”
 99-2555 Outside Record Finish 4.5” to 12″
 99-2556 Outside Smooth Finish 4.5″ to 12″
 99-2423 Outside Recessed 4.5” to 9”
  
214B37 ½ Degree Bevel Tool Bits – Carbon Steel
 DURABIT4 Facing, full range
 DURABIT6 Bevel, 4” through 8″ pipe
 99-3341 Bevel, 10” through 14” Pipe
 99-2908 Cbore 4:1 lead out, 4” Pipe
 99-2909 Cbore 4:1 lead out, 5″ through to 14″ ID
 37 ½ Degree Bevel Tool Bits – Stainless Steel
 DURABIT4 Facing, full range
 DURABIT6 Bevel, 4” through 8″ pipe
 99-3341 Bevel, 10” through 14” Pipe
 30 Degree Bevel Tool Bits – Carbon Steel
 DURABIT4 Facing, full range
 99-3663 Bevel Bit 30 Deg CS (3.312” to 14.00” ID)
 30 Degree Bevel Tool Bits – Stainless Steel
 DURABIT4 Facing, full range
 99-3664 Bevel Bit 30 Deg SS (3.312” to 14.00” ID)
 214B Single Point Tool Bits
 30-0554 Insert*, .031R
 30-4027 Shim Insert*
 99-2940 Cbore 4:1 lead out
 99-4892 Cbore 3:1 lead out
 214B ID Tracking Module Tool Bits
 99-4520 Facing
 99-0135 Bevel 37.5
  
224B37 ½ Degree Bevel Tool Bits – Carbon Steel
 99-0016 Facing
 99-0009 Bevel Full Range
 99-1939 4:1 Counterbore Tool Bit (8.50” – 24” ID)
 99-2090 4:1 Counterbore Tool Bit (10.00” – 24” ID)
 30 Degree Bevel Tool Bits – Carbon Steel
 99-0016 Facing
 99-3273 Bevel Full Range
 224B Single Point Tool Bits:
 30-0554 Carbide Insert, Single Point/Flange Facer
 30-4027 Shim Insert / New Style***
 30-2822 Carbide Insert, for Single Point P91 Alloy
 224B ID Tracking Module Tool Bits
 99-0232 Facing
 99-5859 Bevel 37.5
  
236B37 ½ Degree Bevel Tool Bits – Carbon Steel
 99-0016 Facing
 99-0009 Bevel Full Range
 99-1939 4:1 Counterbore Tool Bit (12.00” – 36” ID)
 99-2090 4:1 Counterbore Tool Bit (14.00” – 36” ID)
 30 Degree Bevel Tool Bits – Carbon Steel
 99-0016 Facing
 99-3273 Bevel Full Range
 236B ID Tracking Module Tool Bits:
 99-0232 Facing
 99-5859 Bevel 37.5
 236B Single Point Tool Bits:
 30-0554 Carbide Insert, Single Point/Flange Facer
 30-4027 Shim Insert / New Style***
 30-2822 Carbide Insert, for Single Point P91 Alloy
  
300 MicroFacer99-0591 Tube Facing Tool Bit
 
 30199-1445 Tube Squaring
 DURABIT1 Tube Squaring .75 Tall
 99-1480 Tube Squaring
 Extended Reach Bits for Small Tubing
(1/8″(.125”) & 3/16″(.188”))
 99-1529 Tube Squaring .969 Tall
 DURABIT2 Tube Squaring .969 Tall
  
301QL99-1445 Tube Squaring
 DURABIT1 Tube Squaring .75 Tall
 99-1480 Tube Squaring
 Extended Reach Bits for Small Tubing (1/8″ & 3/16″)
 99-1529 Tube Squaring .969 Tall
 DURABIT2 Tube Squaring .969 Tall
  
301SPDURABIT1 Tube Squaring .75 Tall
 99-5000 Electro Polished SS
DURABIT3 Tube Squaring 1.160 Tall
 99-1445 Tube Squaring
  
30299-1445 Tube Squaring
 DURABIT1 Tube Squaring .75 Tall
 99-5000 Electro Polished SS
DURABIT3 Tube Squaring 1.160 Tall
  
304Tube Squaring Tool Bits Electro-polished SS
 DURABIT1 Tube Squaring (1.38″ ID to 4.50″ OD)
 99-2490 Tube Squaring (.25″ ID to 2.25″ OD)
 Tube Squaring Tool Bits Stainless Steels Like 304:
 99-1445 Tube Squaring (1.38″ ID to 4.50″ OD)
 99-1479 Tube Squaring (.50″ ID to 3.00″ OD)
  
306DURABIT1 Tube Squaring .75 Tall
  
30899-1052 Squaring Bit for Short Perch Saddles
 99-5000 Squaring Bit for Electro-Polished SS
 99-1445 Tube Squaring Bit (1.38 ID to 8.625 OD)
 99-1479 Tube Squaring Bit (.50 ID to 7.250 OD)
 DURABIT1 Tube Squaring Bit for Soft SS
(1.38” ID to 8.625” OD max wall .38”)
 Model 308 Tube Squaring Bits For Collet Use ONLY:
 99-0257 Facing (Land)
DURABIT7 37.5 Degree Bevel
 99-0351 Deburring
 99-1046 Heavy Duty Tube Squaring Tool Bit
  
572ACSever Tool Bits:
 Cutting Edge – .060” (1.52mm) wide (.043” – .065” WT)
 99-3036 Leaves burr on piece that machine is mounted on
 99-2959 Leaves burr on piece that falls off after serving
 Cutting Edge – .040” (1.mm) wide (.018” – .042” WT)
 99-3549 Leaves burr-on piece that machine is mounted on
 99-3550 Leaves burr on piece that falls off after serving
 Facing Tool Bits for SQM-1AC:
 DURABIT1 Squaring Tool Bit
  
576ACSever Tool Bits:
 Cutting Edge – .100” (2.54mm) wide (.066” – .125” WT)
 99-5473 Leaves burr on piece that falls off after severing
 99-5472 Leaves burr on piece machine is mounted on
 Cutting Edge – .060” (1.52mm) wide (.043” – .005” WT)
 99-5480 Leaves burr on piece that falls off after severing
 99-5477 Leaves burr on piece machine is mounted on
 Facing Tool Bits for SQM-2AC:
 3”(76.2mm) through 6.625”(168.3mm) OD
 DURABIT1 Tube Squaring Tool Bit
 2”(50.8mm) through 3”(76.2mm) OD
 99-2490 Squaring Tool Bit
 99-2490C Coated Squaring Tool Bit
  
614RBL-660RBL614RBL-G2 thru 660RBL-G2
 SEVER ONLY .250”
 30-0225 SPACER,TOOL,3/4″ X 1″ X 3″
 30-0310 SPACER,TOOL,3/4″ X 3/4″ X 3″
 99-5982 TOOL BIT,SEVER,INSIDE
 99-5983 TOOL BIT,SEVER,OUTSIDE
 SEVER AND RIGHT HAND BEVEL
 30-0206 SPACER,TOOL,1/2″ X 3/4″ X 3″
 30-0223 SPACER,TOOL,1/8″ X 3/4″ X 3″
 30-0225 SPACER,TOOL,3/4″ X 1″ X 3″
 99-4077 TOOL BIT,SEVER FOR R.H.BEVEL
 BEVEL BITS
 99-10610 20 DEGREE 2.00″ (50.8MM)
 99-10611 22.5 DEGREE 1.75″ (44.5MM)
 99-10612 25 DEGREE 1.50″ (38.1MM)
 99-10613 27.5 DEGREE 1.38″ (35.1MM)
 99-10614 30 DEGREE 1.25″ (31.8MM)
 99-10615 37.5 DEGREE 0.93″ (23.6MM)
 99-10616 40 DEGREE 0.88″ ( 22.4MM)
 99-10617 45 DEGREE 0.69″ (17.5MM)
 SEVER AND LEFT HAND BEVEL
 30-0223 SPACER,TOOL,1/8″ X 3/4″ X 3″
 30-0225 SPACER,TOOL,3/4″ X 1″ X 3″
 30-0295 SPACER,TOOL,3/4″ X 1 1/2″ X 3″
 99-4078 TOOL BIT,SEVER FOR L.H.BEVEL 
 BEVEL BITS
 99-10618 20 DEGREE 2.00″ (50.8MM)
 99-10619 22.5 DEGREE1.75″ (44.5MM)
 99-10620 25 DEGREE 1.50″ (38.1MM)
 99-10621 27.5 DEGREE 1.38″ (35.1MM)
 99-10622 30 DEGREE 1.25″ (31.8MM)
 99-10623 37.5 DEGREE 0.93″ (23.6MM)
 99-10624 40 DEGREE 0.88″ ( 22.4MM)
 99-10625 45 DEGREE 0.69″ (17.5MM)
 SEVER AND RIGHT HAND COMPOUND BEVEL
 30-0206 SPACER,TOOL,1/2″ X 3/4″ X 3″
 30-0225 SPACER,TOOL,3/4″ X 1″ X 3″
 99-4912 TOOL BIT,SEVER FOR R.H. BEVEL 
 BEVEL BITS
 99-10642 30/10 – 2.00″ (50.8MM)
 99-10643 37.5/10 – 2.00″ (50.8MM)
 99-10644 37.5/15 – 2.00″ (50.8MM)
 99-10645 30/15 – 2.00″ (50.8MM)
 SEVER AND LEFT HAND COMPOUND BEVEL
 30-0225 SPACER,TOOL,3/4″ X 1″ X 3″
 30-0295 SPACER,TOOL,3/4″ X 1 1/2″ X 3″
 99-4936 TOOL BIT,SEVER FOR L.H. BEVEL 
 BEVEL BITS
 99-10646 30/10 – 2.00″ (50.8MM)
 99-10647 37.5/10 – 2.00″ (50.8MM)
 99-10648 37.5/15 – 2.00″ (50.8MM)
 99-10649 30/15 – 2.00″ (50.8MM)
 SEVER DOUBLE BEVEL
 30-0225 SPACER,TOOL,3/4″ X 1″ X 3″
 30-0227 SPACER,TOOL,1/4″ X 3/4″ X 3″
 30-0288 SPACER,TOOL,3/4″ X 1 1/4″ X 3″
 99-10659 SEVER, DOUBLE BEVEL 
 BEVEL BITS
 99-10634 20 DEGREE 1.00″ (25.4MM)
 99-10635 22.5 DEGREE .88″ (22.4MM)
 99-10636 25 DEGREE .75″ (19.1MM)
 99-10637 27.5 DEGREE .68″ (17.3MM)
 99-10638 30 DEGREE .62″ (15.7M)
 99-10639 37.5 DEGREE .46″ (11.7MM)
 99-10640 40 DEGREE .44″ ( 11.2MM)
 99-10641 45 DEGREE .37″ (9.4MM)
 CARBIDE SEVER (P/N 05-0807)
 49-0792 SEVER TOOL HOLDER
 30-3716 SEVER CARBIDE INSERT
 CARBIDE SEVER AND RIGHT HAND BEVEL
 99-10626 20 DEGREE 2.00″ (50.8MM)
 99-10627 22.5 DEGREE 2.00″ (50.8MM)
 99-10628 25 DEGREE 1.81″ (46.0MM)
 99-10629 27.5 DEGREE 1.63″ (41.4MM)
 99-10630 30 DEGREE 1.44″ (36.6MM)
 99-10631 37.5 DEGREE 1.12″ (28.4MM)
 99-10632 40 DEGREE 1.00″ 25.4MM)
 99-10633 45 DEGREE .81″ (20.6MM)
 CARBIDE SEVER & RIGHT HAND COMPOUND BEVEL
 99-10650 30/10 – 1.50″ (50.8MM)
 99-10651 37.5/10 – 1.50″ (50.8MM)
 99-10652 37.5/15 – 1.50″ (50.8MM)
 99-10563 30/15 – 1.50″ (50.8MM)
  
601SBCM-603.5SBCM99-5941C4 Sever, Lead (.950 long)
 Range: Use for Radial Restrictions
 2 ½” pipe up to .250” wall
 3” OD up to .250” wall
 99-7140C4 Sever, Lead (1.312 long)
 99-7984C4 Sever, Trail (1.312 long)
 Range: 1½” pipe up to sch 160
 2” pipe up to .250” wall
 3” OD up to .250” wall
 99-7985C4 Sever, Lead (1.600 long)
 99-7986C4 Sever, Trail (1.600 long)
 Range: 1 ¼” & 1 ½” & 2” pipe up to .250” wall
 
 601SBM – 602.5SBM1/2” x 3/4” Tool Bits For Standard Profile Tool Modules
 Sever Only
 99-1628 Sever Tool Bit, Left Hand
 99-1629 Sever Tool Bit, Left Hand

Information for a tooling quotation

Provide the machine model and serial number, installed module or holder, bit part number, material, actual tube or pipe dimensions, and required bevel, face or counterbore drawing. Include quantity and required date so availability can be checked. If the old bit cannot be identified, send its markings and dimensions with photographs.

Tool-bit resharpening in Aurora, Ontario

Contact Justram about assessment and resharpening of suitable Tri Tool bits. Describe wear or damage and identify the original part before sending tooling. Suitability, remaining geometry and any coating requirements need to be checked; damaged bits are not automatically recoverable.

Manufacturer tooling resources

Tri Tool consumable bits and resharpening resources. For machine selection, review the 204B, 208B or the applicable product page.